I contacted RoadActive Suspension and the Custom Leaf Spring Enhancement Kit # RAS2611 will work perfectly fine on your 2020 GMC Sierra 1500 with adaptive ride control. They have tested this kit and since it mounts to the top of the springs and doesn't contact the frame, there will be no issues at all.
With that being said, another option will be the Firestone Ride-Rite Air Helper Springs # F2609. This will be fully adjustable and, when not towing, will feel nonexistent and keep your ride... view full answer...
For your 2020 GMC Sierra 1500 Denali I recommend using the AirLift Load Lifter 5000 # AL88288, which have internal jounce bumpers that will help protect the bags and still provide support if they're not aired up. You can use these with the Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount # AL74000EZ, which will work on your Sierra 1500 Denali without any problems. This is a great solution to keep your bags aired up and it gives you the flexibility... view full answer...
There is an option for high-quality suspension enhancement for your 2016 GMC Sierra 1500 with the Magneride suspension, but air bags cannot be used as they physically won't fit your truck; the Magneride shocks interfere with where the air bags install, which is why they can't be used. So instead, for rear support you have two options, both of which were designed for use with the Magneride suspension on your 2016 Sierra 1500:
- Timbren Suspension Enhancement System # TGMRCK15MR
- RoadActive... view full answer...
The BAK Revolver X4s Hard Tonneau Cover that you need for your 2018 GMC Sierra 1500 with the 5-1/2' bed is part # BAK25VR. The part BAK79100 that you referenced fits older model GM pickups and isn't compatible with the 2018 model that you have.
The Revolver X4s # BAK25VR is basically the exact same as the Revolver X2 # BAK39120 but with a matte black finish instead of the traditional glossy black finish on the X2. This matte black finish is becoming more popular because it matches the... view full answer...
The Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 is an excellent option that can be transferred to multiple different vehicles when used with the correct wiring harness adapter. That said, you'll also want to install the Replacement Mounting Bracket Kit part # TK5906 in each vehicle as well. I have attached below the correct wiring harness adapter for each vehicle you listed.
2014-2018 GMC Sierra 1500 - Tekonsha Plug-In Wiring Adapter part # 3016 view full answer...
You will only need one set of the CE Smith Extra-Long U-Bolt Kit for Boat Trailer Guide-Ons - Pre-Galvanized Steel - 6" Tall, part # CE11416. Each side of the boat guide-on will take two u-bolts at the bracket.
I have included a product description link, a video demo link, and a photo of the u-bolts installed on the mounting bracket below. view full answer...
I really like the look of the black too of the # TH500XTB that you referenced and that would be what I would go with on your 2021 GMC Sierra 1500. The black is a powder coat which is very durable and would hold up really well. We've not anyone come back and complain that theirs showed wear over time or regret the color choice. view full answer...
There is an installation video for you to check out on a GMC Sierra 1500 of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-209-40.
I have added a link below to this video, as well as a link to the instructions for you. The video is on a Chevy Silverado, which is the same thing so the install will be the same as on your truck. view full answer...
The Demco Tabless Base Plate Kit - Removable Arms # DM9519330 is only compatible with Demco Victory Series tow bars. For a base plate kit that will work with your Ready Brute Elite tow bar you will need the Blue Ox Base Plate Kit # BO94FR. In addition to the base plate kit you will also need the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars # BX88297. view full answer...
The Blue Ox Base Plate Kit part # BX1126 is correct for a 2011 Jeep Wrangler and can then be used with the Blue Ox Alpha 2 Tow Bar part # BX7380 which is what I recommend. In regards to using the Demco SBS Air Force One Supplemental Braking System on a Spartan Chassis that is setup for this, you'd only need part # SM99209 and part # SM6296. The Roadmaster Automatic Battery Disconnect with Switch part # RM-766 would then complete your towing setup. view full answer...
The StowMaster 5,000 only has a 5,000lb capacity so it will likely be overloaded by your 2018 GMC Sierra 1500 so I don't recommend using it. If you still choose to then you'll need a crossbar style baseplate like the # RM-3177-1 you were looking at. If you want to upgrade to a heavier duty tow bar, like the etrailer # e74ZR, then you can go with a direct-connect style baseplate like part # RM-3177-3. view full answer...
The SumoSprings # SS45MR are compatible with the MagneRide suspension on your 2017 GMC Sierra 1500. These have a 2,800 lb weight capacity and a microcellular urethane construction.
The SumoSprings are a great solution to help keep you level while towing. They also absorb bumps and shocks while minimizing sway. The # SS45MR features a no-drill installation and is maintenance free. These come with a limited lifetime warranty and are made in the USA.
I have attached an installation video... view full answer...
The great thing about the standard ladder racks like the Buyers Products # 3371501680 or Erickson # EM07705 is that they can be installed anywhere that you have room on the bed rails of your 2017 GMC Sierra 1500. The base does take up 12-5/8" on your bed rails and there are some limitations that you'll find when installing them on your truck (for example; one truck I installed this system on had a bed liner that took up some space under the rail so it limited where the clamps would fit).
We... view full answer...
Truxedo does indeed offer Pro X15 models that are compatible with the grab handle provided for the GMC Multi Pro tailgate. According to Truxedo, the # TX64FR will work just fine, as it's been specifically designed to fit around that grab handle. As long as that bed liner doesn't add any thickness to the inside edge of the bed side where the tonneau cover would mount, the # TX64FR would work perfectly. view full answer...
The overhead bar on the DeeZee Aluminum Cab Rack part # DZ95050R is going to be more of an octagonal shape than a rounded shape. Aside from the color, it will be the same shape as show on the DeeZee Custom Headache Rack - Mesh Screen - Aluminum part # DZ95050RTB. The rack is constructed of aluminum and weighs in at about 34 lbs. I have attached a photo of this rack for you as well. view full answer...
Yes, there is another option to add a brake controller to your Sierra. Since you have the factory tow package, I recommend the Curt Echo In-Line Wireless Brake Controller item # C79DR. The controller plugs in behind your 7-way with included connectors. This will completely eliminate any need to hardware a controller.
The Curt Echo In-Line Wireless Brake Controller item # C79DR works with all of the 2023 Sierra's with the factory tow package.
The Echo In-Line is a proportional brake controller... view full answer...
The underbed rail system we have for your 2022 GMC Sierra 1500 with a 6-1/2' bed is the B&W Gooseneck Hitch # BWGNRK1019-5W which you would then pair with the Companion Sliding 5th Wheel Hitch # BWRVK3400-5W.
If you're wanting more of a standard kit then you need the Curt Custom Installation Kit # C65KR but this is an above-bed system. At this time a kit like the Under-Bed Rail Kit # RP30868 doesn't exist for your truck. If you want an above-bed kit then the hitch I recommend is the Curt... view full answer...
You can absolutely use the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88288 on your 2020 GMC Sierra 1500 4WD with a lift, so long as you add the correct spacers.
To get the right ones, just measure between the mounting surfaces of the upper and lower brackets, and subtract the design height of the air spring, which for this spring is 5-1/2 inches. Then you can choose the right spacers, and I'll list all of the options, though for a 2 inch to 3-1/2 inch lift you are likely... view full answer...
Go To Results